Volume:650ml

QTY/CTN: 12PCS

G.W./CTN: 8.5kg

CTN SIZE:31.7*24.4*32.3cm

Expiration Date: 2 years

Tyre Sealer & Inflator  

It is used for vacuum bag of bicycles, motorcycles, and other vehicles.

Features:

1.  Easy Using, no need to dismantle or change tire when it is punctured, spray it into the tire directly

2.  Seal automatically and quickly to prevent the air leakage, it can cover the breach within 6mm.

3.  No corrosion and no damage to the tire.

4.  Prolong the shelf life of the tire and has good Anti-aging effect. Popular  in many countries and regions.Necessary item in drivers' car !

characteristics
1. This product is suitable for tires of small and medium cars, motorcycles, bicycles and so on.Injecting this product to intact tires can prevent the tires pricking and air leaking; it has 100% tire repair efficacy for tires which with less than 6mm punctured hole..No need a lifting jack or move the tire..One minute for tire to repair and aerate!

2. this product is non-toxic, tasteless, without oiliness, without side effects, rust-proof.
3. This product is for small fire extinguishing function, can do use the fire extinguisher on vehicle.
4applies to vacuum tire only, during 0 ℃ to 50 ℃.

Remarks:
1. when the tire pressure is insufficient slightly, you can add compressed air (air compressor gas)

After using this product, when the atmospheric pressure of the tire is a little insufficient, can supplement with the compressed air.
2. Stored in a cool and dry place (0 ℃, 50 ℃), and far away from the fire origin.
3. This product is stored in out of the reach of children.

4. Placed it in the trunk of the car not be exposed to the sun.
5. Shelf life is 2 years.

Six quality of tire sealer & inflator:
1. Green, low-carbon, environmentally friendly, simple, convenient;
2.this product is non-toxic, tasteless, without oiliness, without side effects, rust-proof,

etch-proof, protecting the tire
3.strong function of repairing tire,filling gas and extinguishing fire
4. Prevent  tyre punctured, prevent tire Burst, prevent air leak slowly,punctured then repair more than dozens of times;;
5. repairing the tire automatically, reduce and prevent the traffic accident happened;
6. Prolong tire service life, reduce fuel consumption and exhaust emissions to protect the environment

Usage instructions

Usage instructions:
1. put the inflating valve of tire on the top,pull out the valve core,let out any remaining air. screwing the matching plastic tube nut on inflating valve,holding the product and shaking a few seconds.Bottle mouth downward 45  inserted into the plastic pipe at the other end.press the nozzle to inject all the liquid.
2. After gas is saturated, open the plastic cover, visible valve needle, will valve needle inward tightening, and then take off nozzle, immediately start running 3 minutes, can achieve a log effect.
3. Pull out the thorn in the tyre things, if you can't pull out, also does not affect the use effect.
4. Fire extinguishing, quickly shake up the product, the fire extinguishing sprinkler set in the nozzle, alignment fire source, press nozzle, can fire.