fuel efficiency device for auto from xiamen shengbin SB88-05 manufacturer from China Xiamen Shengbin energy&teachnology Co.,Ltd

fuel efficiency device for auto from xiamen shengbin

Payment Terms:	T/T,L/C
Place of Origin:	Fujian, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: SB88-05

Production Capacity: 500

Delivery Date: 10days

Car Make: different size of car

Means of Transport: Ocean

Packing: carbon box

Brand Name: SB

car economizer: fuel economizer

1 oxyhydrogen car fuel economizer
2 increase horsepower machine
3 Oxy-hydrogen Generator
4 Oxy-hydrogen Generator for different size car

Oxyhydrogen fuel economizer for car

SIZE: 39.8*33.5*24.7CM

QTY/CTN: 1PC

G.W./CTN: 6kg(about), packing in carton box

CTN SIZE: 40.3*34*25.2CM

One year warranty

Install on car, but the car not make any changes

Save Fuel 5%-20%

reduce harmful gases 10%-30%

complete combustion! save the cost for carbon cleaning

Add more power and higer speed in the same conditions

Car oxyhydrogen , let the car enjoy green new energy!

Save gas mileage 5% - 20%, reduce emissions10% - 30%;

Complete combustion, clear the carbon deposition, save maintenance cost, and prolong engine life;

In same fuel conditions, the power increasing, the accelerate performance improving;

The original car will not make any changes

The testing result from Product Quality Supervision and : on uniform condition, Equipped the device,the oil-saving rate of auto is 17.7%/km

Installation steps:

1. Take off the device cover, stirring the electrolyte and water evenly, pour mixture into the , then add water to the water level,add water into the kettle, then screwing the device cover .

2. Device is fixed on the car trunk(side).

3. The power wire (cable 1), the control wire( cable 2), the gas conduit,through them into the car and out the side of car

4. The power wire (red cable 1) to connect the battery positive , control wire (green cable 2) to connect the starting circuit of vehicle , red outlet pipe inserted to engine inlet port then locked

5. The blue wire 3 is earthed, aerial socket to connect the power plant. Open the automobile power supply but don't start the engine,when the control lamp is always light is normal.

6. Starting engine to test the working condition of device , stepping on the gas 3 ~ 5 minutes (3000 ~ 4000 RPM) for cleaning engine carbon deposit, vehicle is after testing

Cautions:

A. in icy area,should add the ,below zero 20 or 40 Celsius degree, into the deputy bucket to prevent freezing.

B. Electrolyte containing acidic material,in case contact with eyes, skin, clothes, articles,immediately wash with plenty of water.In case strayed into the mouth, please drink plenty of water immediately. If entering eyes, wash with plenty of clean water immediately and

C. Keep it out of reach of children, also keep it in a cool and dry place